Pressure/Gravity Fillers

Pressure/Gravity Fillers are suitable for bottling virtually any water-thin to medium, consistent viscosity liquids. Pressure/Gravity fillers are ideally suited for thin products, and can handle thicker products than a gravity filler is capable without pressure capabilities. Each model is customized with your specific requirement for contact parts and fill heads.

Standard Specifications

  • Frames are typically 304 stainless steel, either welded 2” tube or C-channel
  • Product reservoirs available in a large range of sizes and materials to suit your needs
  • Product tubing available in PVC, Teflon, silicone, and many other materials
  • Fill head valves and actuators are specified to suit your product and environment
  • 316 stainless steel or poly level sensing float system
  • Touch-screen operator interface
  • Pin-style bottle indexing
  • Photo sensor/counter system to ensure containers are in place prior to filling

Optional Components

  • 316 stainless steel construction upgrade
  • Hazardous construction components and workmanship for flammable products
  • Sanitary models include crimped-end, seamless tubing and threadless tri-clamp fittings, and
    break-down ball valves at the fill heads and tank infeed lines
  • Corrosive contact and corrosive fume construction components available
  • Electronically controlled diving fill heads
  • Starwheel or timing screw indexing
  • Clean-in-place system
  • Container neck locators for proper bottle alignment under fill heads
  • Automatic drip tray

Applications

  • Round, rectangular, oval and F-style containers from 2” up to 18” tall
  • Gravity mode suitable for non-carbonated, non-dairy beverages, mouthwash, hairspray, cleaners,
    pharmaceuticals, and many other thin products
  • Pressure mode suitable for most shampoos, gels, lotions, sauces, thicker cleaners, pharmaceuticals,
    abrasives and more

Power Requirements

  • 115VAC, 3 phase, 60 Hz (other voltage/phase available)
  • 80-100 psi compressed clean dry air
  • NEMA 12, 4, 4X and hazardous location electrical enclosure and components are available
Pressure and Gravity Filler, Liquid Filling Equipment